Installation

AXLE AND DIFFERENTIAL: REAR AXLE HUB: INSTALLATION

1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY

(a) Install the rear axle hub and bearing assembly with the 4 bolts.

Torque : 90 Nm (918 kgf-cm, 66 ft-lbf)

2. CONNECT SKID CONTROL SENSOR WIRE

(a) Connect the rear speed sensor wire connector.

3. INSPECT REAR AXLE HUB BEARING LOOSENESS Rear Axle Hub

4. INSPECT REAR AXLE HUB RUNOUT Rear Axle Hub

5. INSTALL REAR BRAKE DRUM

6. INSTALL REAR WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

7. INSPECT REAR WHEEL ALIGNMENT

Rear Wheel Alignment

8. CHECK FOR SPEED SENSOR SIGNAL

Installation