Door Lock Position Circuit

LIGHTING: LIGHTING SYSTEM: Door LOCK Position Circuit
- Door LOCK Position Circuit

DESCRIPTION

The main body ECU receives door lock position switch signals to control the illuminated entry system.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. READ VALUE USING TECHSTREAM (DOOR LOCK POS SW)

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body / Data List.

(e) According to the display on the tester, read the Data List.

Main Body





OK:

Normal conditions listed above are displayed.

NG -- GO TO POWER DOOR LOCK CONTROL SYSTEM Symptom Related Diagnostic Procedures

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures