Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING VALVE AND TRANSMITTER: REMOVAL

1. REMOVE FRONT WHEEL

2. REMOVE REAR WHEEL

3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER

(a) Remove the valve core and cap, and release the air from the tire.

(b) After ensuring that a sufficient amount of air has been released, remove the nut and washer that are used to secure the tire pressure warning valve and transmitter. Drop the tire pressure warning valve and transmitter inside the tire.

HINT
Keep the removed cap and valve core.

(c) After dropping the tire pressure warning valve and transmitter into the tire, disengage the bead using the tire remover shoe.





NOTICE:
Be careful not to damage the tire pressure warning valve and transmitter due to interference between the valve and the tire bead.

(d) Remove the bead on the upper side in the usual way.

(e) Take out the tire pressure warning valve and transmitter from the tire and remove the bead on the lower side in the usual way.

HINT
Remove the grommet, washer and nut as a set even if the grommet is not damaged.