Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 1990 >> Legacy Sedan 4WD F4-2.2L SOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Bag Control Module: Service and Repair

1. Disconnect ground cable from battery.
2. Turn ignition switch Off, then wait for at least 10 minutes before starting work.
3. Remove lower cover and lower cover panel, then disconnect airbag connectors AB3 and AB8 below steering column. Do not reconnect airbag connectors at steering column until airbag control unit is securely reinstalled.
4. Remove front console box.
5. Disconnect 12 pin yellow, 2 pin blue and 2 pin orange connectors from airbag control unit.
6. Using T30 TORX bit, remove control unit.
7. Reverse procedure to install. Use new TORX bolts when installing.

pro multis · About Operation CHARM