Legacy - 1995 Service Manual Corrections

Two pin locations in connector B2 for the vehicle pressure sensor are numbered incorrectly.

Please refer to the following pages in the 1995 SUBARU LEGACY SERVICE MANUAL, VOLUME 3, SECTION 2-7, To make corrections.

Page 129 - The locations for pins 1 & 3 are reversed.
Change pin # 1 to # 3 and pin # 3 to # 1.

Page 132 - Make the same corrections to connector B2 in the three figures shown on this page

Page 135 - Same corrections as mentioned above.

Any questions concerning this should be directed to the Technical Helpine.