With Select Monitor
CONNECT SELECT MONITORSelect Monitor A/T Cartridge:
1. Install cartridge No. 498349300 and connect Select Monitor to data link connector beneath driver side instrument panel.
Select Monitor ON/OFF Switch:
2. Turn ignition and Select Monitor switches ON.
3. After display is shown, press slash "/" key.
4. After A/T mode is displayed, press function "[0]."
NOTE: Display returns to A/T mode when slash "/" is pressed during on-board diagnostic operation.
READ TROUBLE CODES
Select Monitor Key Pad And Code Display:
1. Connect Select Monitor.
2. Designate mode using function key. Press [F] [B] [0] [ENT] in that order.
3. Ensure trouble code(s) is shown.
PREVIOUS TROUBLE CODE READING
1. Connect Select Monitor.
2. Designate mode using function key. Press [F] [B] [1] [ENT] in that order.
3. Ensure trouble code(s) is shown.