Fuel Filter: Service and Repair

FUEL FILTER REMOVAL
1. Release fuel pressure.





2. Disconnect fuel delivery hoses from fuel filter.
3. Remove filter from holder.

INSPECTION
1. Check the inside of fuel filter for dirt and water sediment.
2. If it is clogged or if replacement interval has been reached replace it.
3. If water is found in it, shake and expel the water from inlet port.

INSTALLATION

CAUTION:
- If fuel hoses are damaged at the connecting portion, replace it with a new one.
- If clamps are badly damaged, replace with new ones.

1. Installation is in the reverse order of removal.





2. Tighten hose clamp screws.

Tightening Torque: 1.0 + 0.5 - 0.0 N.m (0.7 + 0.4 - 0.0 ft-lb)