Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 1995 >> Legacy Sedan 4WD F4-2.2L SOHC >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Assembly: Service and Repair

CONTROL UNIT REMOVAL
1) Disconnect GND cable from battery.
2) Set temperature control lever to "FULL COLD" position.





3) Remove temperature control cable from heater unit.

NOTE: Do not attempt to move link of heater unit during installation.

4) Remove cup holder.





5) Remove center panel and then disconnect connector.





6) Remove control unit assembly and disconnect connector.

ADJUSTMENT
1) Operate temperature control lever to "FULL COLD" position.





2) Install control cable to lever (1). While pushing outer cable, secure control cable with clip (2)


INSTALLATION
Installation is in the reverse order of removal.

NOTE: Before control unit installation, set temperature control lever to "FULL COLD" position.


pro multis · About Operation CHARM