Cranking Signal: Testing and Inspection

DTC P11OO
STARTER SWITCH CIRCUIT MALFUNCTION (ST - SW)

DTC Detecting Condition
Two consecutive trips with fault.

Trouble Symptom
Failure of Engine to start.

1. Check operation of starter motor.
[CHECK]: Turn ignition switch to "ST" to ensure that starter motor operates.

NOTE: On A/T vehicles, place the inhibitor switch in the "P" or "N" position.
On M/T vehicles, depress the clutch pedal.

[NO]: Diagnose starter motor circuit.
[YES]: Repair open circuit or poor contact in Engine Control Module (ECM) connector.