Diagnostic Procedure: Security Indicator Light/Circuit

Step 1 =:

F : DIAGNOSTICS PROCEDURE FOR SECURITY INDICATOR LIGHT AND INDICATOR LIGHT CIRCUIT

1. CHECK SECURITY INDICATOR LIGHT.




1. Remove security indicator light.
2. Measure resistance between security indicator light connector terminals.

Terminals / Specified resistance:
No.2 - No. 4 / Approx. 120 Ohm

2. CHECK POWER SUPPLY FOR INDICATOR LIGHT.




1. Disconnect connector of security indicator light.
2. Measure voltage between security indicator light connector and body.

Connector & terminal / Specified voltage:
(i8) No.2 - Body / 10 V, or more

3. CHECK HARNESS CONNECTOR BETWEEN SECURITY INDICATOR LIGHT AND SECURITY CONTROL MODULE.




1. Disconnect connectors of security indicator light and security control module.
2. Measure resistance of harness connector between security indicator light and security control module.

Connector & terminal / Specified resistance:
(i8) No.4 - (B93) No.7 / 10 Ohm, max.