Separation of Each Case

1. Separation of torque converter clutch case and transmission case sections

CAUTION:
- Be careful not to damage the oil seal and bushing inside the torque converter clutch case by the oil pump cover.
- Be careful not to lose the rubber seal.

NOTE: Separate these cases while tapping lightly on the housing.





2. Separation of transmission case and extension sections (AWD)
a. Remove vehicle speed sensor 1.





b. While pulling the extension slightly, disconnect the connector for the duty solenoid C (transfer).

CAUTION: Be careful not to cut the harness.

3. Separate both sections.