Mode FA0, Switch 2
MODE FA1 SWITCH 2 (SW2)Reference Values
- Lights up when the N or P range is selected (No. 1).
- Lights up when the R range is selected (No. 2).
- Lights up when the D range is selected (No. 3).
- Lights up when the 3 range is selected (No. 4).
- Lights up when the 2 range is selected (No. 5).
- Lights up when the 1 range is selected (No. 6).
- Lights up when the diagnosis switch is connected (No. 7).
NOTE: For description of LED Nos. 1 to 6, refer to DTC P0705, Transmission Range Sensor Circuit Malfunction.