Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Antitheft and Alarm Systems: Service and Repair
SECURITY CONTROL MODULE
1. Disconnect battery ground cable.
2. Remove radio.
3. Disconnect connector from security control module and then remove security control module.
4. Installation is in the reverse order of removal.
NOTE:
- To install the security control module, tighten screws securely so that the screws do not come loose.
- When installing a non-genuine radio, make sure that the radio harness does not touch the security control module.