Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Keyless Entry: Service and Repair
KEYLESS ENTRY CONTROL MODULE
1. Disconnect battery ground cable.
2. Remove lower cover and then disconnect connector.
3. Remove keyless entry control module (A) while disconnecting connector.
4. Installation is in the reverse order of removal.
Tightening torque: 7.4 ± 2.5 Nm (0.75 ± 0.25 kg.m, 5.4 ± 1.8 ft.lb)