Installation

CAUTION: Replace gaskets with new ones.




1. Install front and rear catalytic converter assembly to front exhaust pipe.




2. Install front and rear catalytic converter assembly.
Temporarily tighten bolt which installs center exhaust pipe to hanger bracket.




3. Install front exhaust pipe to cylinder heads.

Tightening torque:
30 ± 5 N.m (3.1 ± 0.5 kg.m, 22.41 ± 3.6 ft.lb)




4. Install front and rear catalytic converter assembly to rear exhaust pipe.

Tightening torque:
18 ± 5 N.m (1.8 ± 0.5 kg.m, 13.0 ± 3.6 ft.lb)




5. Tighten bolt which holds front and rear catalytic converter assembly to hanger bracket.

Tightening torque:
35 ± 5 N.m (3.8 ± 0.5 kg.m, 26.0 ± 3.6 ft.lb)




6. Connect rear oxygen sensor connector.
7. Install under cover.
8. Lower the vehicle.




9. Connect connector to front oxygen (A/F) sensor.




10. Connect battery ground cable.