P0740
DTC P0740 - TORQUE CONVERTER CLUTCH SYSTEM MALFUNCTIONDTC DETECTING CONDITION:
- Two consecutive driving cycles with fault
TROUBLE SYMPTOM:
- No lock-up (after engine warm-up)
- No shift or excessive tight corner "braking"
CAUTION: After repair or replacement of faulty parts, conduct CLEAR MEMORY MODE and INSPECTION MODE. Refer to How To Clear Diagnostic Trouble Codes.
10BI1: CHECK ANY OTHER DTC ON DISPLAY.
CHECK: Is there any other DTC on display?
YES: Inspect the relevant DTC using "10. Diagnostics Chart with Trouble Code for 2200 cc Models".
NO: Go to step 10B12.
10BI2: CHECK LOCK-UP DUTY SOLENOID CIRCUIT.
Check lock-up duty solenoid circuit.
CHECK: Is there any trouble in duty solenoid B circuit?
YES: Repair or replace lock-up duty solenoid circuit.
NO: Go to step 10BI3.
10BI3: CHECK THROTTLE POSITION SENSOR CIRCUIT.
Check throttle position sensor circuit.
CHECK: Is there any trouble in throttle position sensor circuit?
YES: Repair or replace throttle position sensor circuit.
NO: Go to step 10BI4.
10BI4: CHECK TORQUE CONVERTER TURBINE SPEED SENSOR CIRCUIT.
Check torque converter turbine speed sensor circuit.
CHECK: Is there any trouble in torque converter turbine speed sensor circuit?
YES: Repair or replace torque converter turbine speed sensor circuit.
NO: Go to step 10BI5.
10BI5: CHECK ENGINE SPEED INPUT CIRCUIT.
Check engine speed input circuit.
CHECK: Is there any trouble in engine speed input circuit?
YES: Repair or replace engine speed input circuit.
NO: Go to step 10BI6.
10BI6: CHECK INHIBITOR SWITCH CIRCUIT.
Check inhibitor switch circuit.
CHECK: Is there any trouble in inhibitor switch circuit?
YES: Repair or replace inhibitor switch circuit.
NO: Go to step 10BI7.
10BI7: CHECK BRAKE LIGHT SWITCH CIRCUIT.
Check brake light switch circuit.
CHECK: Is there any trouble in brake light switch circuit?
YES: Repair or replace brake light switch circuit.
NO: Go to step 10BI8.
10BI8: CHECK ATF TEMPERATURE SENSOR CIRCUIT.
Check ATF temperature sensor circuit.
CHECK: Is there any trouble in ATF temperature sensor circuit?
YES: Repair or replace ATF temperature sensor circuit.
NO: Go to step 10BI9.
10BI9: CHECK POOR CONTACT.
Check poor contact in TCM connector.
CHECK: Is there poor contact in TCM connector?
YES: Repair poor contact in TCM connector.
NO: Go to step 10BI10.
10BI10: CHECK MECHANICAL TROUBLE.
Check mechanical trouble in automatic transmission.
CHECK: Is there any mechanical trouble in automatic transmission?
YES: Repair or replace automatic transmission.
NO: Replace TCM.