Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2000 >> Impreza L Coupe F4-2.2L SOHC >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Installation

Control Unit

1. Disconnect GND cable from battery.
2. Set temperature control switch to "FULL HOT" and mode selector switch to "DEF" position and recirc switch to "FRESH" position.




3. Disconnect temperature control cable and mode door control cable from heater unit then disconnect recirc control cable from intake unit.

NOTE: Do not attempt to move links during installation.

4. Remove console box.
5. Remove center panel and then disconnect connector.




6. Remove audio.




7. Remove control unit assembly from center console.
8. Installation is in the reverse order of removal.

NOTE: Before installing control unit, set temperature control switch to "FULL HOT" and mode selector switch to "DEF" position and recirc switch to "FRESH" position.
pro multis · About Operation CHARM