Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Rear
Rear Pillar UpperREMOVAL AND INSTALLATION
1. Remove these parts
a. rear seat cushion and backrest.
b. tapping screw from rear pillar lower trim panel, and remove trim panel by sliding it forward.
c. front pillar upper trim end.
2. Pry the pawl off front end using screwdriver.
3. Remove clips which hold rear pillar upper trim, and remove trim panel by sliding it forward.
Installation is in the reverse order of removal.
CAUTION: Be sure to securely hook pawls of rear pillar upper trim panel on body flange.