Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Removal and Installation
1. Disconnect battery ground cable.
2. Disconnect connector from throttle position sensor.
3. Remove throttle position sensor holding screws, and remove throttle position sensor itself.
4. Installation is in the reverse order of removal.
CAUTION: When installing throttle position sensor, adjust the position to match with the specified data.
Tightening torque:
2.2 ± 0.2 N.m (0.22 ± 0.02 kg.m,1.6 ± 0.1 ft.lb)