Replacement
Brake FluidA: REPLACEMENT
CAUTION:
^ The FMVSS No. 116, fresh DOT3 or 4 brake fluid must be used.
^ Cover bleeder with waste cloth, when loosening it, to prevent brake fluid from being splashed over surrounding parts.
^ Avoid mixing different brands of brake fluid to prevent degrading the quality of the fluid.
^ Be careful not to allow dirt or dust to get into the reservoir tank.
NOTE:
^ During bleeding operation, keep the clutch reservoir tank filled with brake fluid to eliminate entry of air.
^ Clutch pedal operating must be very slow.
^ For convenience and safety, it is advisable to have two men working.
^ The amount of brake fluid required is approximately 70 ml (2.4 US fl. oz. 2.5 Imp fl. oz.) for total clutch system.
1. Either jack-up vehicle and place a safety stand under it, or lift-up vehicle.
2. Remove both front and rear wheels.
3. Draw out the brake fluid from reservoir tank with syringe.
4. Refill reservoir tank with recommended brake fluid.
Recommended brake fluid: FMVSS No. 116, fresh DOT3 or 4 brake fluid
5. Bleed air from oil line with the help of a coworker.