| Camshaft | Bend Limit | | 0.020 Millimeter (mm) |
| Thrust Clearance | Standard | 0.030 - 0.090 Millimeter (mm) |
| | Limit | 0.11 Millimeter (mm) |
| Cam Lobe Height | Intake | 39.485 - 39.585 Millimeter (mm) |
| | | 39.385 Millimeter (mm) |
| | Exhaust | 39.257 - 39.357 Millimeter (mm) |
| | | 39.157 Millimeter (mm) |
| Journal O.D. | | 31.928 - 31.945 Millimeter (mm) |
| Journal Hole I.D. | | 32.000 - 32.018 mm |
| Oil Clearance | Standard | 0.055 - 0.090 Millimeter (mm) |
| | Limit | 0.10 Millimeter (mm) |
| Intake Valve Timing | Opening | 1 Degrees Before Top Dead Center (deg BTDC) |
| | Closing | 51 Degrees After Bottom Dead Center (deg ABDC) |
| Exhaust Valve Timing | Opening | 50 Degrees Before Bottom Dead Center (deg BBDC) |
| | Closing | 6 Degrees After Top Dead Center (deg ATDC) |