Muffler: Service and Repair
REMOVAL1. Separate the muffler from rear exhaust pipe.
CAUTION: Be careful, the exhaust pipe is hot.
2. Apply a coat of SUBARU CRC to mating area of rubber cushions in advance.
SUBARU CRC (Part No. 004301003)
3. Remove the front, left and right rubber cushion, and detach muffler assembly.
INSTALLATION
1. Install in the reverse order of removal.
NOTE: Replace the gasket with a new one.
Tightening torque: 48 Nm (4.9 kgf-m, 35.4 ft. lbs.)
INSPECTION
1. Make sure there are no exhaust leaks from connections and welds.
2. Make sure there are no holes or rusting.
3. Make sure the cushion rubber is not worn or cracked.