Flywheel: Service and Repair
REMOVAL1. Remove transmission assembly.
ST 498497100 CRANKSHAFT STOPPER
2. Install ST on flywheel.
3. Remove clutch cover and clutch disc.
NOTE:
^ Take care not to allow oil on the clutch disc facing.
^ Do not disassemble either clutch cover and clutch disc.
ST 498497100 CRANKSHAFT STOPPER
4. Using ST, remove flywheel.
INSTALLATION
ST 498497100 CRANKSHAFT STOPPER
1. Install flywheel and ST.
2. Tighten the flywheel attaching bolts to the specified torque.
NOTE: Tighten flywheel installing bolts gradually. Each bolt should be tightened to the specified torque in a crisscross fashion.
Tightening torque: 72 Nm (7.3 kgf-cm, 52.8 ft. lbs.)
3. Install clutch disc and cover.
4. Install transmission assembly.