Front

Front Disc Rotor

REMOVAL
1. Loosen wheel nuts, jack-up vehicle, support it with safety stands, and remove wheel.





2. Remove caliper body from housing, and suspend it from strut using a wire.





3. Remove the disc rotor.

NOTE: If disc rotor seizes up within the hub, drive disc rotor out by installing an 8-mm bolt in holes B on the rotor.

4. Clean mud and foreign particles from caliper body assembly and support.

INSTALLATION
1. Install the disc rotor.
2. Install the caliper body to housing.

Tightening torque: 78 Nm (8 kgf-cm, 58 ft. lbs.)