Clearance Test

INSPECTION





1. If stop light switch does not operate properly (or if it does not stop at the specified position), replace with a new one.
Specified position: L
2 ± 1.5/0 mm (0.079 ± 0.059/0 inch)





2. Measure the clearance between threaded end of stop light switch and stopper.

CAUTION: Be careful not to rotate stop light switch.

Stop light switch clearance: A 0.3 mm (0.012 inch)

3. If it is not in specified value, adjust it by adjusting position of stop light switch.

CAUTION: Be careful not to rotate stop light switch.