Differential Mount: Service and Repair

Rear Differential Front Member

REMOVAL
1. Disconnect ground cable from battery.
2. Jack-up the vehicle.





3. Using a transmission jack, support rear differential, and remove rear differential front member.

INSTALLATION





1. Install rear differential front member.
Tightening torque:
T1: 65 Nm (6.6 kgf-m, 48 ft. lbs.)
T2: 110 Nm (11.2 kgf-m, 81 ft. lbs.)

INSPECTION
1. Check rear differential front member for damage, bend, or corrosion.
If damage, bend, or corrosion is excessive, replace rear differential front member.
2. Check bushings of rear differential front member for cracking, hardening, or damage.
^ If cracking, hardening, or damage is excessive, replace rear differential front member.