A/T Fluid Replacement

REPLACEMENT
1. Lift-up the vehicle.
2. Drain the ATF completely.

CAUTION: Directly after the engine has been running, the ATF is hot. Be careful not to burn yourself.





3. Replace with a new gasket, and then tighten the drain plug (ATF).
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
4. Lower the vehicle.
5. Pour ATF from the ATF charge pipe. Recommended fluid:
Dexron III type automatic transmission fluid
Capacity: Fill the same amount of ATF drained from drain plug hole.
Capacity when transmission is overhauled: 9.3 - 9.6 liters (9.8 - 10.1 US quarts, 8.2 - 8.4 Imp quarts)
6. Check the level and leaks of ATF.
7. Bleed the air of control valve.
8. Check the level and leaks of ATF.