Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Motor Linkage: Service and Repair

Front Wiper Motor and Link

REMOVAL

1. Disconnect the ground cable from battery.
2. Remove the cowl panel.
3. Disconnect the connector of motor.




4. Loosen the bolts and nuts to remove wiper link.




5. Loosen the bolts and nuts to remove motor.

INSTALLATION

1. Install the wiper link to the vehicle, and then connect the motor connector.
2. Connect the battery ground cable to battery.
3. To confirm that the motor is at auto stop position, turn the wiper switch ON/OFF once.
4. Disconnect the ground cable from battery.




5. Tighten the nut where rod (A) and link plate (B) is aligned in a straight line.
6. Install in the reverse order of removal.