Clear Memory Mode

Clear Memory Mode

OPERATION
WITHOUT SUBARU SELECT MONITOR
Current trouble codes shown on the display are cleared by turning the ignition switch OFF after conducting the on-board diagnostics operation. Previous trouble codes, however, cannot be cleared since they are stored in the TCM memory which is operating on the back-up power supply. These trouble codes can be cleared by removing the specified TCM connector for at least 2 minutes.
CLEAR MEMORY: Non-turbo model
Remove TCM connector (B55).
Turbo model Remove TCM connector (B56).
^ The TCM connector is located in the line to the memory back-up power supply of the TCM. Removal of this fuse clears the previous trouble codes stored in the TCM memory.
^ Be sure to remove the TCM connector for at least the specified length of time. Otherwise, trouble codes may not be cleared.