Do you have access to Mitchell1 Prodemand If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Side Airbag Sensor
Side Airbag SensorREMOVAL
1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery, and wait for at least 20 seconds before starting work.
3. Remove the outer seat belt (FRONT).
4. Detach the side airbag sensor, and then disconnect the airbag connector.
INSTALLATION
Install in the reverse order of removal.
Tightening torque:
T1: 5.9 N.m (0.60 kgf-m, 4.4 ft-lb)
T2: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
T3: 10 N.m (1.0 kgf-m, 7.4 ft-lb)
T4: 20 N.m (2.0 kgf-m, 14.8 ft-lb)
T5: 25 N.m (2.5 kgf-m, 18.4 ft-lb)