Basic Diagnostic Procedure
Basic Diagnostic ProcedurePROCEDURE
WITH SUBARU SELECT MONITOR
CAUTION:
- Subaru Select Monitor is required for reading DTC, performing diagnosis and reading current data.
- Remove foreign matter (dust, water and oil etc.) from the body integrated unit connector during removal and installation.
- For the model with immobilizer, registration of immobilizer may be needed after the replacement of controller and etc. For detail procedure, refer to "REGISTRATION MANUAL FOR IMMOBILIZER".
NOTE:
- To check harness for broken wires or short circuits, shake the problem part or connector.
- Check List for Interview. Check List For Interview
Step 1 - 5:
