2.5L SOHC

Camshaft Position Sensor

REMOVAL




1. Disconnect the ground cable from battery.




2. Disconnect the connector from camshaft position sensor.




3. Remove the bolt which installs camshaft position sensor to the support.




4. Remove the bolt which installs the camshaft position sensor support to camshaft cap LH.
5. Remove the camshaft position sensor and the support as a unit.




6. Remove the camshaft position sensor itself.

INSTALLATION
Install in the reverse order of removal.

Tightening torque:
Camshaft position sensor support 6.4 N.m (0.65 kgf-m, 4.7 ft-lb)
Camshaft psition sensor 64 N.m (0.65 kgf-m, 4.7 ft-lb)