Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2005 >> Legacy F4-2.5L SOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Alarm Module >> Service and Repair >> Immobilizer Control Unit
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Immobilizer Control Unit

Immobilizer Control Unit

NOTE: The control of immobilizer system is carried out in body integrated unit.

REMOVAL

NOTE:
- If replacing the body integrated unit, check the current setting and note it.
- When replacing the body integrated unit, all immobilizer keys also must be replaced and registered again.

1. Disconnect the ground cable from battery.
2. Remove the instrument panel lower cover.
3. Disconnect the connector of body integrated unit.

CAUTION: Be careful to keep water and other foreign materials away from body integrated unit.

4. Remove the body integrated unit from the body integrated unit mounting bracket using flat tip screwdriver.

CAUTION: Be careful not to damage the unit when removing it forcibly from the bracket.

5. Remove the clutch pedal stopper arm. (MT model).




6. Remove two body integrated unit bracket mounting bolts, and remove the bracket.

INSTALLATION
Install in the reverse order of removal.

NOTE:
- When the same body integrated unit is reinstalled in the same vehicle, it is not necessary to register the immobilizer again.
- Make sure it conforms to the current setting condition after installation.
pro multis · About Operation CHARM