Front Door Window Glass: Service and Repair

Front Door Glass

REMOVAL
1. Remove the front door trim.
2. Remove the sealing cover.
3. Remove the outer mirror assembly.




4. Remove the mirror gusset.




5. Remove the stabilizer (Inner) and stabilizer (Outer).




6. Remove the screw at the rear end of weather strip, and remove weather strip.




7. Operate the power window switch to move the glass to position shown in the figure, and then remove the two nuts from service holes.




8. Take out the door glass.

CAUTION:
- Do not turn the regulator in closing direction after removal of the glass. Otherwise gear may be disengaged.
- Avoid impact and damage to the glass.

INSTALLATION
1. Install in the reverse order of removal.

CAUTION: Make sure the slider (front) and roller (rear) of glass is placed securely in sash.

2. Adjust the front door glass.

Tightening torque:
T1: 7.4 N.m (0.75 kgf-m, 5.5 ft-lb)
T2: 13.7 N.m (1.4 kgf-m, 10.1 ft-lb)