Clear Memory Mode

CLEAR MEMORY MODE
1. On the [[Main Menu]] display screen, select the {2. Each System Check} and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the {Transmission Control System} and press the [YES] key.
3. Press the [YES] key after the information of transmission type is displayed.
4. On the [[Transmission Diagnosis]] display screen, select the {Clear Memory} and press the [YES] key.
5. When the Done and Turn Ignition Switch OFF are shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.

NOTE: For detailed operation procedure, refer to the Subaru Select Monitor OPERATION MANUAL.