Restraint Systems

DTC 15 DRIVER'S AIRBAG FAILURE

DTC DETECTING CONDITION:
- Airbag harness (Driver's side) is shorted to power supply.
- Airbag module harness (driver's side) is shorted to power supply.
- Roll connector is shorted to power supply.
- Driver's airbag module is faulty.
- Airbag control module is faulty.

CAUTION:
- Before diagnosing the airbag system, be sure to turn the ignition switch to OFF, disconnect the ground terminal from battery, and wait more than 20 seconds before starting to work.
- When inspecting the airbag main harness, disconnect the driver's airbag module and passenger's airbag module connectors for safety.

NOTE: Prior to starting diagnosis, prepare two airbag resistors (98299PA040).

Wiring Diagram:

Step 1 - 4:

Step 5 - 6: