Connecting Rod, Engine
CONNECTING RODCap Nuts 45 Nm (4.6 kgf-m, 33.2)
Bend twist per 100 mm (3.94 in) in length
Limit 0.10 mm (0.0039 in.)
Side clearance of large end
Standard 0.070 - 0.330 mm (0.0028 - 0.0130 in.)
Limit 0.4 mm (0.016 in.)
Bearing of large end
Oil clearance
Standard 0.016 - 0.044 mm (0.00063 - 0.0017 in.)
Limit 0.05 mm (0.0020 in.)
Bearing size (Thickness at center)
Standard 1.492 - 1.501 mm (0.0587 - 0.0591 in.)
0.03 mm (0.0012 in.) US 1.510 - 1.513 mm (0.0594 - 0.0596 in.)
0.05 mm (0.0020 in.) US 1.520 - 1.523 mm (0.0598 - 0.0600 in.)
0.25 mm (0.0098 in.) US 1.620 - 1.623 mm (0.0638 - 0.0639 in.)
Bushing of small end
Clearance between piston pin and bushing
Standard 0 - 0.022 mm (0 - 0.0009 in.)
Limit 0.030 mm (0.0012 in.)
NOTE:
US: Undersize
OS: Oversize
ID: Inside Diameter
OD: Outside Diameter