Transmission Gear Oil Replacement
Transmission Gear OilREPLACEMENT
1) Pull out the oil level gauge.
2) Lift-up the vehicle.
3) Remove the drain plug using TORX BIT T70, and drain the transmission gear oil completely.
CAUTION:
Directly after the engine has been running, the transmission gear oil is hot. Be careful not to burn yourself.
NOTE:
Tighten the transmission drain plug after draining the transmission gear oil.
4) Lower the vehicle.
5) Pour gear oil into the gauge hole.
Recommended gear oil:
Use GL-5 (75W-90) or equivalent.
Gear oil capacity:
3.5 liters (3.7 US quarts, 3.1 Imp quarts)
6) Check the level of the transmission gear oil.
CAUTION:
When inserting the level gauge into transmission gear, align the protrusion on the top end of level gauge with the notch in the gauge hole.
NOTE:
The level should be within the specified range marked on the gauge.