Clearing Trouble Codes

CLEAR MEMORY MODE
1) On the "Main Menu" display screen, select the (2. Each System Check) and press the [YES] key.
2) On the "System Selection Menu" display screen, select the (Transmission Control System) and press the [YES] key.
3) Press the [YES] key after the information of transmission type is displayed.
4) On the "Transmission Diagnosis" display screen, select the (Clear Memory) and press the [YES] key.
5) When the "Done" is shown on display screen, turn the Subaru Select Monitor power switch and ignition switch to OFF.

NOTE:
^ For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION.
^ When (Clear Memory 21 is selected and executed, DTC and learned control memory is cleared. If Clear Memory 2 is performed, execute the learning control.