A/T - 4AT, Filter/Torque Specification Revision
NUMBER: 16-75-09DATE: 04/08/09
APPLICABILITY
SUBJECT:
4AT Automatic Transmission Strainer
Introduction
The purpose of this bulletin is to inform you that the automatic transmission strainer has changed from being made out of metal to resin. The length of the bolts and the torque specification has also changed.
Countermeasure in Production
The new style strainer was used in production towards the end of October, 2008 starting with transmission # 374122.
Part Information
Torque Specification
Interchangeability
The strainers are interchangeable for the models listed; however the correct bolts and torque specification must be used depending upon what strainer is installed.
Disclaimer