Transmission Gear Oil Replacement
Transmission Gear OilREPLACEMENT
1) Pull out the oil level gauge.
2) Lift-up the vehicle.
3) Remove the transmission under cover.
4) Drain the transmission gear oil completely.
CAUTION:
Directly after the vehicle has been running or the engine has been long idle running, the transmission gear oil is hot. Be careful not to burn yourself.
NOTE:
^ Tighten the transmission gear oil drain plug after draining transmission gear oil.
^ Use anew gasket.
5) Lower the vehicle.
6) Pour gear oil into the gauge hole.
Recommended gear oil:
Use GL-5 or equivalent.
Gear oil capacity:
4.1 liters (4.3 US quarts, 3.6 Imp quarts)
7) Check the level of the transmission gear oil.
NOTE:
^ When inserting the level gauge into transmission gear, align the protrusion on the side of the top part of the level gauge with the notch in the gauge hole.
^ The gear oil level should be within the specified range marked on the level gauge.