Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Disassembly and Assembly
WIPER BLADEDISASSEMBLY
1. METAL TYPE
Pull on the side (A) of wiper rubber stopper, and then remove the rubber from blade assembly.
2. RESIN TYPE
Pull the wiper rubber top slightly from the stopper (A) and pull it out fully.
ASSEMBLY
1. METAL TYPE
1. Insert the wiper rubber onto blade so that the stopper is in the position shown.
2. Make sure the wiper rubber is securely fastened to the pull stopper (A).
2. RESIN TYPE
Resin Type:
1. Insert the wiper rubber through the claw (B).
2. Insert the wiper rubber top until it protrudes about 20 mm (0.79 in) from the stopper (D).
3. Insert the wiper rubber into the claw (A).