display screen, select the {Each System Check} and press the [YES] key.
3. On the display screen, select the {Occupant Detection System} and press the [YES] key.
4. On the display screen, select the {Re-zeroing} and press the [YES] key.
5. will be displayed on the screen. Inspect the following items to adjust the vehicle conditions.
- Move the seat backrest in the upright position.
- Slide to the backmost position.
- Put nothing on the seat cushion.
- Sit on the seat cushion and tidy the seat cloth.
- Make sure that passenger's seat belt is not inserted into buckle, pulled or not stuck.
- Make sure the ambient temperature is within 0 - 40 degrees C (32 -104 degrees F).

6. will be displayed on the screen. Slide the passenger's seat to the backmost position, make sure that the backrest is in the upright position, and then press the [YES] key.
7. When the seat belt. Continue: "YES", Quit: "NO"> is displayed on the screen, make sure that passenger's seat belt is released from buckle and press the [YES] key.
8. When the is displayed on the screen, make sure that no one is on the passengers seat, the airbag OFF indicator comes on and the ON indicator goes off, and then press the [YES] key.

NOTE:
- After pressing the [YES] key, will be displayed. Do not touch and swing the vehicle while the message is displayed.
- When the is displayed during the calibration, go to step 10.

9. If the zero calibration is successfully completed, the will be displayed. Press the [YES] key and turn the ignition switch to OFF to finish the diagnosis.
10. When the is displayed during the calibration, turn the ignition switch to OFF once and turn it back to ON. Then, read the DTC of airbag system. If the DTC is input, perform the system calibration after repairing malfunction. If the DTC is not input, check the status of seat and vehicle and perform the system calibration again.

NOTE: If the zero calibration is unsuccessful, malfunction may occur in occupant detection system, or the status of seat and vehicle may not be appropriate. Also, if the airbag warning light comes on, read the DTC and perform the diagnosis referring to the "List of Diagnostic Trouble Code (DTC)" in AIRBAG SYSTEM.