Restraints and Safety Systems: Diagrams

AIRBAG CONNECTOR

PROCEDURE

1. POWER SUPPLY, BUCKLE SWITCH
1. How to disconnect
1. Move the slide lock (A) in the direction of the arrow.




2. Disconnect the connector with slide lock (A) moved.

CAUTION: When pulling the slide lock or disconnecting the connector, be sure to hold onto the connector and not the wire.

2. How to connect




Holding the connector (A), and push it in carefully until a connecting sound is heard.

CAUTION: Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.

2. DRIVER'S AIRBAG MODULE AND PRETENSIONER
1. How to disconnect




1. Using a flat tip screwdriver, pry the push lock upward to unlock.




2. Pull the connector to disconnect from driver s side airbag module assembly.




2. How to connect Connect the connector in reverse order of disconnecting. At this time, be sure to insert the push lock in until connecting sound is heard.

CAUTION:
- Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.
- At this time, be sure to insert the push lock in.

3. DRIVER'S AIRBAG (BETWEEN AIRBAG MAIN HARNESS AND ROLL CONNECTOR), PASSENGER'S AIRBAG
1. How to disconnect




1. Push the slide lock (A) into the direction of arrow.




2. With the slide lock pushed, disconnect the connector.

CAUTION: When pulling the side lock or disconnecting the connector, be sure to hold onto the connector and not the wire.

2. How to connect




Holding the connector, push it in carefully until a connecting sound is heard.

CAUTION: Be sure to insert the connector in until it is locked. Then pull on it gently to make sure that it is locked.

4. SIDE AIRBAG
1. How to disconnect
1. Push the lock arm (A).




2. With the lock arm (A) pushed in, move the slide lock (B) in the direction of arrow.




3. With the slide lock moved, release the lock arm (back to its original position), and disconnect the connector.

CAUTION: When pulling the side lock or disconnecting the connector, be sure to hold onto the connector and not the wire.




2. How to connect Holding the connector, and push it in carefully until a connecting sound is heard.

CAUTION: Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.

5. FRONT SUB-SENSOR AND SIDE AIRBAG SENSOR AND SEAT POSITION SENSOR




1. How to disconnect Holding outer part (A), pull it in the direction of the arrow.

CAUTION: When pulling the slide lock or disconnecting the connector, be sure to hold onto the connector and not the wire.




2. How to connect Holding the connector, and push it in carefully until a connecting sound is heard.

CAUTION:
- Outer (A) moves back, and so do not put your hand on the outer part.
- Be sure to insert the connector in until it locks. Then pull on it gently to make sure that it is locked.