Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Rear Quarter Trim
Rear Quarter TrimREMOVAL
1. Remove the rear seat.
2. Remove the seat belt lower anchor bolt.
3. Remove cap (B) on the upper side of the rear quarter pillar front trim.
NOTE: Remove molding (A), and remove the cap from the backside of the pillar trim being careful not to damage the trim.
4. Remove the bolt and screw, and remove the rear quarter pillar front trim.
5. Remove covers (A) and (B).
6. Remove the clips and screws, and remove the rear quarter upper trim.
7. Remove the rear floor spacer.
8. Remove the luggage room end covers.
9. Remove the bolt and screws, and remove the rear quarter lower trim.
INSTALLATION
Install in the reverse order of removal.
Tightening torque
Refer to "COMPONENT" of "General Description".
Refer to "COMPONENT" of "General Description".