Removal

ATF Cooler Pipe and Hose

REMOVAL

1) Set the vehicle on a lift.
2) Remove the battery.
3) Lift up the vehicle.
4) Remove the under cover.
5) Remove the heat shield cover.





6) Disconnect the ATF cooler hose from the radiator.

NOTE:
^ Do not use a screwdriver or other pointed tools.
^ If it is hard to remove the hose, wrap the hose with cloth to prevent from damaging it, and while turning with pliers, pull straight out by hand.





7) Disconnect the ATF cooler hoses from the pipes.

NOTE:
^ Do not use a screwdriver or other pointed tools.
^ If it is hard to remove the hose, wrap the hose with cloth to prevent from damaging it, and while turning with pliers, pull straight out by hand.





8) Disconnect the ATF cooler pipe from frame.





9) Remove the ATF inlet pipe and outlet pipe.

CAUTION:
When disconnecting the outlet pipe, be careful not to lose the ball and spring used together with the retaining screw.