Installation

INSTALLATION

PITCHING STOPPER

1) Install the pitching stopper.

Tightening torque:
T1: 50 N-m (5.1 kgf-m, 36.9 ft-lb)
T2: 58 N-m (5.9 kgf-m, 42.8 ft-lb)





2) Install the air intake chamber and intake boot. (Non-turbo model)
3) Install the intercooler. (Turbo model)

TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER

1) Install the rear cushion rubber.

Tightening torque: 40 N-m (4.1 kgf-m, 29.5 ft-lb)

2) Install the transmission rear crossmember.

Tightening torque:
T1: 35 N-m (3.6 kgf-m, 25.8 ft-lb)
T2: 70 N-m (7.1 kgf-m, 51.6 ft-lb)





3) Remove the transmission jack.
4) Install the heat shield cover.





5) Install the front, center and rear exhaust pipes, and the muffler. (Non-turbo model)
6) Install the center, rear exhaust pipes and the muffler. (Turbo model)