Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2009 >> Impreza F4-2.5L SOHC >> Repair and Diagnosis >> Body and Frame >> Fender >> Front Fender >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Fender: Service and Repair

FRONT FENDER

REMOVAL

1. FRONT FENDER PANEL

1. Disconnect the ground cable from battery.
2. Remove the side sill spoilers.
3. Remove the front bumper face.
4. Remove the headlight assembly.
5. Remove the mud guard.
6. Detach the tabs and remove the cowl panel side.







1. Detach tabs (A), (B), and (C) from the vehicle exterior.
2. Detach tabs (D) and (E).

7. Remove the bolt, and remove the front fender panel.







2. COWL SIDE STAY

For operation procedures, refer to performance stay items.

INSTALLATION

CAUTION: After the installation of front fender panel, be sure to perform headlight beam adjustment. Install in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

NOTE: Install while paying attention to make a uniform clearance around the front fender panel. For the dimension of clearance, refer to "SPECIFICATION" in "General Description".
pro multis · About Operation CHARM