Keyless Entry: Testing and Inspection

Keyless Entry System

INSPECTION

1. SYMPTOM CHART

Symptom Chart (Part 1):

Symptom Chart (Part 2):

2. CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION

CAUTION: Be sure to reset keyless transmitter of other vehicles registered to the inspection target vehicle, and vehicles to which keyless transmitters were registered for inspection, to the condition before performing the inspection. (Re-register the keyless transmitters.)

Step 1-4:

3. CHECK KEYLESS ENTRY CONTROL MODULE

Step 1-4:

4. CHECK BODY INTEGRATED UNIT POWER SUPPLY AND GROUND CIRCUIT
Refer to the INSPECTION of POWER SUPPLY AND GROUND CIRCUIT of the Door Lock Control System for detailed procedures. Testing and Inspection

5. CHECK DOOR SWITCH

Step 1-3:

Step 4-5:

6. CHECK KEY WARNING SWITCH

Step 1-6:

7. CHECK ROOM LIGHT OPERATION

Step 1-5:

8. CHECK HAZARD LIGHT OPERATION

Step 1-3:

9. CHECK KEYLESS BUZZER

Step 1-5:

10. CHECK TRUNK LID LOCK ACTUATOR

Step 1-5:

11. CHECK DOOR LOCK SWITCH
For operation procedure, refer to the door lock switch inspection of the door lock control system. Testing and Inspection

12. CHECK IGNITION SWITCH ILLUMINATION