Inspection

INSPECTION

Before performing diagnostics, check the following item which might affect body integrated unit malfunctions.

1. Measure the battery voltage and check electrolyte.

Standard voltage: 12 V or more

Specific gravity: 1.260 or more

2. Check the fuse condition.
Make sure that ampere of the fuse is setting value, and it is not blown out.
(Be sure to check the back-up fuse also.)

3. Check the connecting condition of harness and harness connector.
4. Confirm settings of body integrated unit are corresponded to vehicle equipment.
5. Make sure that the User Customizing of the body integrated unit matches the vehicle equipment.
6. Confirm Factory or Market setting of body integrated unit registrations is "Market".
7. Confirm key illumination does not blink with ignition switch turned to ON.